Home » Products » Scrap Metal Baler» Side Push Out Baler » Y83/T-250B Scrap Metal Baler
Y83/T-250B Scrap Metal Baler

Y83/T-250B Scrap Metal Baler

With bale side out, this Y83/T-250B scrap metal baler is mainly suitable for the metal smelting factory with medium and large scaled output, metal processing and recycling plant and other places. For the customers in Russia and Ukraine, this product is extremely popular and it is one of our best sellers. Its outstanding stong points are high stable performance, low failure rate, high production efficiency, high density of bales and so on.

Our scrap metal baler can be manipulated by hand or PLC. According to the requirements of users, its compacting box varies in size, such as 2000mm×1400mm×900mm or 2000mm×1750mm×1200mm. In addition, this product is allowed to be structured with pull rod so as to be convenient for assembling, disassembling, transporting in containers, decreasing the cost of delivery. The applicable thickness of the processing materials reaches 5mm. The motor of 60kw or 74kw can be configured as required.

Technical Parameters
No.Parameters Note
1Main Hydraulic Cylinder Model YG340/220-2220Quantity1pcs
Nominal Thrust 2500kNStroke2220mm
2Side Hydraulic CylinderModel YG240/160-1560Quantity2pcsDouble cylinders in parallel
Nominal Thrust 1150kN×2Stroke 1560mm
3Lid Cylinder Model YG240/160-1350Quantity1pcs
Nominal Thrust 1150kNStroke 1350mm
4Wicket CylinderModel YG160/110-560Quantity1pcs
Nominal Thrust 500kNStroke 560mm
5Hydraulic System Pressure 25MPa (Max. Pressure: 27MPa)
6Oil Tank Capacity 600L
7Compacting Box Size2000mm×1750mm×900mm
8Thickness of Baled Material Common metal mateials
9Bale Size 500mm×500mm
10Bale Density ≥ 1800kg/m3
11Control Mode Manual control or PLC control
12Single Cycle TimeAbout 90s
13Oil PumpModel HY180Y-RPRated Pressure31.5MPa
Flow Quantity 180ml/rQuantity2pcs
14Motor Model Y225M-4Rated Rotating Speed1480rpm
Power 45kwQuantity2pcs
15Overall Dimension 7400mm×5550mm×3200mm
16Machine Weight26.5ton

Related Names
Balers | Scrap Metal Baler | Scrap Metal Baling Press | PLC Control Metal Baler | Automatic Baling Press Machine | Scrap Metal Compactor

Feedback Form
Other Products
    1. Y83/T-125 Scrap Metal BalerOur scrap metal baler is configured with shearing blades on the Lid and sides of compacting box. Therefore, the large sized material can be cut first and then be compressed.
    1. Y83/T-160A Scrap Metal BalerOur Y83/T-160A scrap metal baler is popularized in the metal processing and recycling station, metal smelting plant with small and medium production. It is configured ...